Installation

LIGHTING: STOP LIGHT SWITCH: INSTALLATION

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Attach the 2 claws to install the adjuster.





2. INSTALL STOP LIGHT SWITCH ASSEMBLY

(a) Insert the stop light switch so that it contacts the pedal cushion.





NOTICE:
insert the stop light switch with a force of less than 98 N*m (1000 kgf*cm 72.3 ft.*lbf).

(b) Rotate the stop light switch clockwise 90° to install it to the adjuster.





Standard:

A: 1.5 to 2.5 mm (0.0591 to 0.0984 in.)

NOTICE:
* When the stop light switch is rotated clockwise, make sure the stop light switch moves outward less than 1 pitch (pitch: distance between 2 screw threads).
* Rotate the stop light switch with a torque of 1.5 N*m (15 kgf*cm.13 in.*lbf).
* Do not allow silicon grease to contact the stop light switch.

(c) Connect the connector.