Back Power Window Switch

WINDSHIELD / WINDOW GLASS: BACK POWER WINDOW SWITCH: INSPECTION

1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY





(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the power window regulator switch assembly.

(b) Check that the LED illuminates.

(1) Apply battery voltage to the power window regulator switch and check that the LED illuminates.

OK:





If the result is not as specified, replace the power window regulator switch assembly.

2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Power Slide Type)





(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the power window regulator switch assembly.

(b) Check that the LED illuminates.

(1) Apply battery voltage to the power window regulator switch and check that the LED illuminates.

OK:





If the result is not as specified, replace the power window regulator switch assembly.