Power Window Regulator Motor (for Front Door)

WINDSHIELD / WINDOW GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): INSPECTION

1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/o Jam Protection Function)

(a) Apply battery voltage to connector terminals 1 and 2.





(b) Apply battery voltage to the regulator motor and check the operation of the regulator motor.

OK:





If the result is not as specified, replace the motor.

2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/ Jam Protection Function)





NOTICE:
* Do not apply positive (+) battery voltage to any terminals except terminal 2, to avoid damaging the pulse sensor inside the motor.
* Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

(a) Apply battery voltage to the regulator motor and check the operation of the regulator motor.

OK:





If the result is not as specified, replace the power window regulator motor.

3. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/o Jam Protection Function)

(a) Apply battery voltage to connector terminals 1 and 2.





(b) Apply battery voltage to the regulator motor and check the operation of the regulator motor.

OK:





If the result is not as specified, replace the motor.

4. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/ Jam Protection Function)





NOTICE:
* Do not apply positive (+) battery voltage to any terminals except terminal 2, to avoid damaging the pulse sensor inside the motor.
* Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

(a) Apply battery voltage to the regulator motor and check the operation of the regulator motor.

OK:





If the result is not as specified, replace the power window regulator motor.