DTC 5C-40

NAVIGATION: NAVIGATION SYSTEM (w/o USB Audio System): 5C-40: Camera Picture Error
5C-40 - Camera Picture Error

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs Navigation System (w/o USB Audio System).

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - TELEVISION CAMERA)

(a) Disconnect the K23 navigation receiver assembly connector.





(b) Disconnect the X1 television camera assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. CHECK NAVIGATION RECEIVER ASSEMBLY (CA+ VOLTAGE)

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Result





C -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

B -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

A -- REPLACE TELEVISION CAMERA ASSEMBLY Removal