Reassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

HINT
* Use the same procedures for the RH and LH side.
* The procedures listed below are for the LH side.

1. INSTALL BACK-UP LIGHT BULB

(a) Install the bulb to the socket.





(b) Insert the bulb/socket unit into the combination light.

(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.

2. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the bulb to the socket.





(b) Insert the bulb/socket unit into the combination light.

(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.

3. INSTALL TAIL AND STOP LIGHT BULB

(a) Install the bulb to the socket.





(b) Insert the bulb/socket unit into the combination light.

(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.