Traction Control Relay: Testing and Inspection

BRAKE CONTROL: STOP LIGHT CONTROL RELAY: ON-VEHICLE INSPECTION

1. CHECK STOP LIGHT CONTROL RELAY

(a) Remove the stop light control relays (BRK NO. 1 and BRK NO. 2) from the engine room relay block.

(b) Measure the resistance according to the value(s) in the table below.





Standard resistance:

for BRK NO. 1





for BRK NO. 2





If the result is not as specified, replace the relay.

(c) Install the stop light control relays (BRK NO. 1 and BRK NO. 2).