Repair Instruction - Customize Parameters

INTRODUCTION: REPAIR INSTRUCTION: CUSTOMIZE PARAMETERS

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

1. CUSTOMIZING FUNCTION WITH THE TECHSTREAM

(a) POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

Tilt & Telescopic





(b) AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

Air Conditioner





(c) AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

Air Conditioner





(d) THEFT DETERRENT SYSTEM

Main Body





HINT
*: w/ Glass Breakage Sensor

(e) LIGHTING SYSTEM

Main Body





HINT
*1: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*1





*2





*3





(f) POWER DOOR LOCK CONTROL SYSTEM

Main Body





(g) WIRELESS DOOR LOCK CONTROL SYSTEM

Main Body





(h) METER / GAUGE SYSTEM

Warning:





(i) SLIDING ROOF SYSTEM

Sliding Roof





(j) POWER WINDOW CONTROL SYSTEM (w/Jam Protection Function)

Power Window





2. CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display)

(a) Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration below.

Unit setting

Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)

Power door lock control system (automatic door lock function, automatic door unlock function)

Lighting system (auto light turn off function)

Default setting (customize setting cancel function)

















HINT
*: When setting change operation is performed by SELECT switch, writing of customized value must be performed.