Removal

LIGHTING: FOG LIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH and LH side.
* The procedures listed below are for the LH side.

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

2. REMOVE FOG LIGHT ASSEMBLY LH

(a) for Steel Type Bumper:





(1) Disconnect the connector.

(2) Push the tabs on the grommet.

(3) Detach the 2 claws and remove the fog light.

(b) for Resin Type Bumper:





(1) Disconnect the connector.

(2) Push the tabs on the aiming screw.

(3) Detach the 2 claws and remove the fog light.