Removal

MIRROR: OUTER REAR VIEW MIRROR GLASS: REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.

1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY

(a) Push the upper part of the mirror surface and tilt it.





Using a moulding remover, push the bottom of the glass upwards as shown in the illustration. Slide the glass upwards to detach the 4 claws, and remove the glass.

HINT
Apply protective tape to the outer rear view mirror to prevent it from being damaged.





w/ Mirror Heater:

Disconnect the 2 connectors and remove the mirror glass.





w/ Retract Mirror:

Disconnect the 3 connectors and remove the mirror glass.