Installation

1UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: INSTALLATION

1. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY





Install the air injection control driver with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)





Connect the 2 wire harness clamps.

(a) Install the ground cable with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)





Connect the 4 air injection control driver connectors.