Removal

3UR-FBE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR: REMOVAL

CAUTION:
* The procedures should be performed by at least 2 people.
* Wear protective gloves when removing the exhaust pipe.
* The exhaust pipe is extremely hot immediately after the engine has stopped.
* Confirm that the exhaust pipe has cooled down before removing it.
1. REMOVE PROPELLER SHAFT HEAT INSULATOR Removal

2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY Removal

3. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (except Regular Cab Standard Deck) Removal

4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for Regular Cab Standard Deck) Removal

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

6. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Using SST, remove the sensor.

SST : 09224-00010





7. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Using SST, remove the sensor.

SST : 09224-00010