Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR (for Double Cab): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH (for Front Side) Disassembly

3. REMOVE FRONT ARMREST BASE PANEL UPPER LH (for Front Side) Disassembly

4. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (for Front Side) Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (for Front Side) Disassembly

6. REMOVE FRONT SIDE AIRBAG SENSOR

(a) Disconnect the connector.





(b) Remove the screw and side airbag sensor.

7. REMOVE REAR SEAT ASSEMBLY (for Rear Side)

(a) Remove the rear seat Removal.

8. REMOVE REAR DOOR SCUFF PLATE LH (for Rear Side) Removal

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Rear Side)

10. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH (for Rear Side) Removal

11. REMOVE REAR SIDE AIRBAG SENSOR

(a) Remove the bolt and side airbag sensor.





(b) Disconnect the connector.