Disassembly
SEAT: REAR SEAT ASSEMBLY (for Double Cab): DISASSEMBLY
CAUTION:
Wear protective gloves. Sharp areas on the seat cushion frame and the seatback frame may injure your hands.
1. REMOVE REAR SEAT ASSEMBLY LH
(a) Using a T50 "TORX" socket, remove the 2 bolts and seat.
2. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH
(a) Using a T40 "TORX" socket, remove the bolt.
(b) Remove the bolt and seat leg.
3. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY RH
(a) Remove the bolt and seat leg.
4. REMOVE OUTER REAR SEAT LOCK COVER LH
(a) Remove the screw.
(b) Detach the clip and 3 claws in the order shown in the illustration, and then remove the lock cover.
5. REMOVE INNER REAR SEAT LOCK COVER LH
(a) Remove the 2 screws.
(b) Detach the 3 claws in the order shown in the illustration, and then remove the lock cover.
6. REMOVE REAR SEAT CUSHION ASSEMBLY LH
(a) Using a T40 "TORX" socket, remove the 2 bolts and seat cushion.
7. REMOVE REAR SEATBACK LOCK CONTROL BEZEL LH
(a) Detach the 4 claws and remove the bezel.
8. REMOVE REAR SEAT CUSHION COVER WITH PAD LH
(a) Disconnect the cable from the seat turn lock.
(b) Detach the hook and open the 2 fasteners, and then open the seat cushion cover.
(c) Detach the hooks from the seat cushion frame.
(d) Detach the hooks from the seat cushion frame.
(e) Remove the hog rings and seat cushion cover with pad.
9. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH
(a) Remove the hog rings and seat cushion cover from the seat cushion pad.
10. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
(a) Cut the cable tie and disconnect the cable.
(b) Remove the 4 screws and release handle.
11. REMOVE REAR SEAT HINGE COVER LH
(a) Remove the 2 screws and hinge cover.
12. REMOVE REAR SEAT HINGE COVER RH
(a) Remove the 2 screws and hinge cover.
13. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY LH
(a) Remove the bolt and seat turn lock.
14. REMOVE REAR SEAT HEADREST ASSEMBLY LH
15. REMOVE CENTER REAR SEAT HEADREST ASSEMBLY
16. REMOVE REAR SEAT HEADREST SUPPORT
(a) Detach the 8 claws and remove the 4 headrest supports.
17. REMOVE REAR SEATBACK COVER WITH PAD LH
(a) Detach the hooks and remove the seatback cover with pad.
18. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH
(a) Remove the hog rings and seatback cover from the seatback pad.
19. REMOVE SEAT LEG SUB-ASSEMBLY LH
(a) Remove the bolt and seat leg.
20. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY
(a) Using a T45 "TORX" socket, remove the bolt.
(b) Remove the bolt and seat leg.
21. REMOVE INNER REAR SEAT LOCK COVER RH
(a) Remove the 2 screws.
(b) Detach the 3 claws in the order shown in the illustration, and then remove the lock cover.
22. REMOVE OUTER REAR SEAT LOCK COVER RH
(a) Remove the screw.
(b) Detach the clip and 3 claws in the order shown in the illustration, and then remove the lock cover.
23. REMOVE REAR SEAT CUSHION ASSEMBLY RH
(a) Using a T40 "TORX" socket, remove the 2 bolts and seat cushion.
24. REMOVE REAR SEATBACK LOCK CONTROL BEZEL RH
(a) Detach the 4 claws and remove the bezel.
25. REMOVE REAR SEAT CUSHION COVER WITH PAD RH
(a) Disconnect the cable from the rear seat turn lock.
(b) Detach the hook and open the 2 fasteners, and then open the seat cushion cover.
(c) Detach the hooks from the seat cushion frame.
(d) Detach the hooks and remove the hog rings, and then remove the seat cushion cover with pad.
26. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH
(a) Remove the hog rings and seat cushion cover from the seat cushion pad.
27. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH
(a) Cut the cable tie and disconnect the cable.
(b) Remove the 4 screws and release handle.
28. REMOVE REAR SEAT HINGE COVER LH
(a) Remove the 2 screws and hinge cover.
29. REMOVE REAR SEAT HINGE COVER RH
(a) Remove the 2 screws and hinge cover.
30. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY RH
(a) Remove the bolt and seat turn lock.
31. REMOVE REAR SEAT HEADREST ASSEMBLY RH
32. REMOVE REAR SEAT HEADREST SUPPORT RH
(a) Detach the 4 claws and remove the 2 headrest supports.
33. REMOVE REAR SEATBACK COVER WITH PAD RH
(a) Detach the hooks and remove the seatback cover with pad.
34. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH
(a) Remove the hog rings and seatback cover from the seatback pad.