Removal

SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.

1. REMOVE FRONT SEAT HEADREST ASSEMBLY LH

2. REMOVE INNER FRONT SEAT TRACK COVER LH REAR

(a) Operate the power seat switch to move the seat to the foremost position.

(b) Using a screwdriver, detach the 2 claws and remove the seat track cover.

HINT
Tape the screwdriver tip before use.





3. REMOVE OUTER FRONT SEAT TRACK COVER LH REAR





(a) Using a screwdriver, detach the 2 claws and remove the seat track cover.

HINT
Tape the screwdriver tip before use.

4. REMOVE FRONT SEAT ASSEMBLY LH





(a) Operate the power seat switch to move the seat to the foremost position.

(b) Remove the 2 bolts.

(c) Operate the power seat switch to move the seat to the rearmost position.

(d) Remove the 2 bolts.





(e) Operate the power seat switch to move the seat to the center position.

(f) w/ Leg Support Adjustment Switch:





Operate the leg support adjustment switch to move the seat cushion to the open position.

(g) Disconnect the cable from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

(h) Disconnect the seat wire connectors under the seat.

(i) Remove the front seat.