Exhaust Manifold

EXHAUST MANIFOLD SUB-ASSEMBLY RH

Temporarily install the exhaust manifold and then uniformly tighten 8 new nuts that are not labeled A. Then tighten the new nuts labeled A in the illustration.






For nut A - Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

Except nut A - Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

EXHAUST MANIFOLD SUB-ASSEMBLY LH

Temporarily install the exhaust manifold and then uniformly tighten 8 new nuts that are not labeled A. Then tighten the new nuts labeled A in the illustration.






For nut A - Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

Except nut A - Torque 21 Nm (214 kgf-cm, 15 ft-lbf)