Removal
THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH Removal
3. REMOVE COWL SIDE TRIM BOARD RH Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE LOWER INSTRUMENT COVER LH Removal
6. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal
7. REMOVE INSTRUMENT PANEL BOX DOOR COVER Removal
8. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
9. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY Removal
10. REMOVE ECU INTEGRATION BOX RH
(a) Disconnect the connectors and detach the clamp.
(b) Remove the 2 nuts, bolt and the certification ECU with seat belt control ECU.
11. REMOVE CERTIFICATION ECU
(a) Detach the 2 claws and remove the certification ECU.