Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: REMOVAL

1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

3. REMOVE HEATER CONTROL ASSEMBLY Removal

4. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKETS

(a) Remove the 4 bolts.





(b) Pull the navigation receiver as shown in the illustration to detach the 6 clips on the backside of the navigation receiver.





(c) Disconnect the connectors and remove the navigation receiver.

5. REMOVE HAZARD SWITCH WIRE

(a) Disengage the 2 clamps.





(b) Disconnect the connector and remove the hazard switch wire.

6. REMOVE NO. 1 RADIO BRACKET





(a) Remove the 4 screws and bracket.

7. REMOVE NO. 2 RADIO BRACKET





(a) Remove the 4 screws and bracket.