Automatic Running Board

EXTERIOR PANELS / TRIM: AUTOMATIC RUNNING BOARD: DISASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE SIDE AUTO STEP MOTOR ASSEMBLY

(a) Disengage the 4 clamps.





(b) Remove the bolt.





(c) Using a 6 mm hexagon wrench, remove the 3 hexagon bolts and side auto step motor assembly.

2. REMOVE FLOOR SIDE SILL STAY

(a) Remove the 6 bolts and floor side sill stay.