Reassembly

EXTERIOR PANELS / TRIM: SIDE STEP: REASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL STEP PLATE LH

(a) Attach the 9 claws and 8 clips to install the step plate.

(b) Install the 2 bolts.

Torque : 2.5 Nm (25 kgf-cm, 22 in-lbf)

2. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR

(a) Install the No. 6 rocker panel moulding protector with the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

3. INSTALL SIDE STEP BRACKET LH

(a) Install the side step bracket with the 2 bolts.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

4. INSTALL NO. 2 SIDE STEP BRACKET LH

(a) Install the No. 2 side step bracket with the 2 bolts.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

5. INSTALL NO. 3 SIDE STEP BRACKET LH

(a) Install the No. 3 side step bracket with the 2 bolts.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)