Part 3

INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL - (Continued)

51. REMOVE VISOR BRACKET COVER RH

HINT
Use the same procedure described for the LH side.

52. REMOVE VISOR ASSEMBLY LH

(a) Remove the 2 screws and visor.

53. REMOVE VISOR ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

54. REMOVE VISOR HOLDER

HINT
Use the same procedure for the other visor holder.

(a) Turn the visor holder approximately 45° and pull it out as shown in the illustration.

(b) Detach the 2 claws and remove the visor holder.

55. REMOVE DRIVE MONITOR SWITCH Removal

56. REMOVE MAP LIGHT ASSEMBLY Removal

57. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror) Removal

58. REMOVE NO. 1 ROOM LIGHT ASSEMBLY Removal

59. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Before removing the roof headlining, move the front seats and rear No. 1 seat to the positions shown in the illustration.

(a) w/ EC Mirror:

Disconnect the inner mirror connector.

(b) w/ Sliding Roof:

Disconnect the drive gear connector.

(d) Disconnect the connector and detach the 2 clamps from the front pillar RH.

(e) Disconnect the connector and detach the clamp from the rear pillar RH.

(f) w/o Sliding Roof:

(1) Remove the 5 clips.

(g) w/ Sliding Roof:

(1) Remove the 5 clips.

(2) Detach the 2 clips, 2 guides and 10 fasteners.

Text in Illustration

(h) Remove the roof headlining from the back door as shown in the illustration.

NOTICE:
Be careful not to damage the roof headlining when remove it.

60. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

(a) Detach the 4 claws of the front shoulder belt anchor plate and slide the front shoulder belt anchor plate in the direction of the arrow to remove it.

61. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

62. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH

(a) Detach the 3 clips and remove the roof side rail garnish.

63. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

64. REMOVE REAR NO. 2 SIDE RAIL SPACER LH (w/o Rear No. 2 Seat)

(a) Detach the 3 claws and remove the rear No. 2 side rail spacer.

65. REMOVE REAR NO. 2 SIDE RAIL SPACER RH (w/o Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.

66. REMOVE REAR NO. 3 SIDE RAIL SPACER LH (w/ Rear No. 2 Seat)

(a) Detach the 2 claws and remove the rear No. 3 side rail spacer.

67. REMOVE REAR NO. 3 SIDE RAIL SPACER RH (w/ Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.

68. REMOVE QUARTER TRIM COVER

HINT
Use the same procedure for the other quarter trim cover.

(a) Detach the 2 claws and remove the quarter trim cover.

69. REMOVE QUARTER TRIM JACK COVER SUB-ASSEMBLY

(a) Detach the 3 claws and 2 guides and remove the quarter trim jack cover.

70. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

(a) Detach the 2 claws and 2 guides and remove the rear combination light service cover.

71. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

HINT
Use the same procedure described for the LH side.

72. REMOVE SIDE TRIM BOX LH (w/o Rear No. 2 Seat)

(a) Remove the 2 screws.

(b) Detach the 8 claws and remove the side trim box.

73. REMOVE SIDE TRIM BOX RH (w/o Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.

74. REMOVE REAR FLOOR FINISH SIDE PLATE LH (w/o Rear No. 2 Seat)

(a) Remove the 2 screws.

(b) Detach the claw and 2 guides and remove the rear floor finish side plate.

75. REMOVE REAR FLOOR FINISH SIDE PLATE RH (w/o Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.

76. REMOVE REAR SEAT SHOULDER BELT HANGER LH (w/ Rear No. 2 Seat)

(a) Detach the claw and guide and remove the rear seat shoulder belt hanger.

77. REMOVE REAR SEAT SHOULDER BELT HANGER RH (w/ Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.

78. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH (w/ Rear No. 2 Seat)

(a) Detach the 4 claws and 2 guides and remove the quarter trim lid.

79. REMOVE DECK SIDE TRIM CUP HOLDER LH (w/ Rear No. 2 Seat)

(a) Remove the 4 screws.

(b) Detach the 2 claws and remove the deck side trim cup holder.

80. REMOVE DECK SIDE TRIM CUP HOLDER RH (w/ Rear No. 2 Seat)

HINT
Use the same procedure described for the LH side.