Removal

DOOR LOCK: REAR DOOR LOCK: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH Disassembly

3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH Disassembly

5. REMOVE REAR DOOR SERVICE HOLE COVER LH Disassembly

6. REMOVE REAR DOOR GLASS RUN LH Disassembly

7. REMOVE REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH Disassembly

8. REMOVE REAR DOOR QUARTER WINDOW GLASS LH Disassembly

9. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH Disassembly

10. REMOVE REAR DOOR LOCK ASSEMBLY LH

(a) Using a T30 "TORX" wrench, remove the 3 screws.





(b) Move the rear door lock assembly downward, pull the release plate out of the rear door outside handle frame, and remove the rear door lock assembly and cables as a unit.

(c) Remove the door lock wiring harness seal from the rear door lock assembly.

11. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH Disassembly

12. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY LH Disassembly