Reassembly

EXTERIOR PANELS / TRIM: ROOF RACK: REASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT ROOF RACK LEG LH

(a) Clean the threads of the bolt with non-residue solvent (when reusing the bolt).

(b) Apply adhesive to the threads of the bolt (when reusing the bolt).

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

(c) Using a T30 "TORX" socket wrench, install the front roof rack leg with the 2 bolts.

2. INSTALL REAR ROOF RACK LEG LH

(a) Clean the threads of the bolt with non-residue solvent (when reusing the bolt).

(b) Apply adhesive to the threads of the bolt (when reusing the bolt).

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

(c) Using a T30 "TORX" socket wrench, install the rear roof rack leg with the 2 bolts.

3. INSTALL NO. 1 ROOF CARRIER SUPPORT LH

(a) Attach the 2 claws to install the No. 1 roof carrier support.

4. INSTALL ROOF RACK PROTECTOR LH

(a) Attach the 2 claws to install the roof rack protector.

5. INSTALL FRONT ROOF RACK LEG CUSHION LH

(a) Attach the 4 claws to install the front roof rack leg cushion.

6. INSTALL REAR ROOF RACK LEG CUSHION LH

(a) Attach the 4 claws to install the rear roof rack leg cushion.