Installation
EXTERIOR PANELS / TRIM: ROOF RACK: INSTALLATION
HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.
1. INSTALL ROOF RAIL ASSEMBLY LH
(a) Clean the threads of the bolt with non-residue solvent (when reusing the bolt).
(b) Apply adhesive to the threads of the bolt (when reusing the bolt).
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.
(c) Install the roof rail with the 4 bolts.
Torque : 23 Nm (235 kgf-cm, 17 ft-lbf)
2. INSTALL FRONT ROOF RACK LEG COVER LH
(a) Attach the 4 claws to install the front roof rack leg cover.
3. INSTALL REAR ROOF RACK LEG COVER LH
(a) Attach the 4 claws to install the rear roof rack leg cover.