Part 2
SEAT: REAR NO. 2 SEAT ASSEMBLY: DISASSEMBLY - (Continued)
22. REMOVE REAR SEAT LOCK RELEASE LEVER ASSEMBLY
(a) Remove the 2 screws.
Text in Illustration
(b) Detach the hook and remove the lever.
(c) Detach the 2 clamps.
Text in Illustration
(d) Twist the 2 cable ends in the direction indicated by the arrow and disconnect the 2 cables.
23. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH
(a) Detach the 7 clips and remove the board.
24. REMOVE REAR SEATBACK LOCK HOOK
(a) Remove the lock hook.
25. REMOVE REAR SEAT NO. 1 COVER BEZEL
(a) Remove the 2 screws, detach the guide and remove the bezel.
Text in Illustration
26. REMOVE SEATBACK COVER WITH PAD
(a) Detach the hooks.
Text in Illustration
(b) Detach the 8 clips and remove the seatback cover with pad.
27. REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH
(a) Remove the 7 hog rings and seatback cover.
28. REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR
(a) Cut off the 5 tack pins and remove the protector from the seatback pad.
Text in Illustration
29. REMOVE REAR SEAT HEADREST COVER
(a) Remove the 2 screws.
Text in Illustration
(b) Detach the 2 claws and guide and remove the cover.
30. REMOVE REAR SEAT HEADREST CABLE
(a) Detach the 2 clamps.
Text in Illustration
(b) Twist the 2 cable ends in the direction indicated by the arrow and remove the cable.
31. REMOVE REAR SEAT HEADREST ASSEMBLY
(a) Remove the 3 nuts and headrest.
32. REMOVE REAR NO. 3 SEAT PROTECTOR LH
(a) Detach the 4 claws and remove the 2 protectors.
33. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH
(a) Detach the 4 claws and remove the cover.
34. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH
(a) Remove the screw.
Text in Illustration
(b) Detach the 2 claws and guide and remove the cover.
35. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER RH
(a) Detach the 5 claws and remove the cover.
36. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER RH
(a) Remove the screw.
Text in Illustration
(b) Detach the 2 claws and guide and remove the cover.
37. REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY
(a) Detach the 2 clamps.
Text in Illustration
(b) Twist the cable end in the direction indicated by the arrow and remove the strap.
38. REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY (for RH Side)
(a) Detach the 3 clamps and cut off the 2 cable ties.
Text in Illustration
(b) Twist the cable end in the direction indicated by the arrow and remove the strap.
39. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Remove the clamp labeled B and detach the 2 clamps labeled A.
Text in Illustration
(b) Cut off the 2 cable ties.
(c) Twist the cable end in the direction indicated by the arrow and remove the cable.
40. REMOVE NO. 2 SEAT LOCK CABLE
(a) Detach the clamp.
Text in Illustration
(b) Twist the cable end in the direction indicated by the arrow and remove the cable.
41. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH
(a) Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and frame.
42. REMOVE NO. 3 SEAT LEG ASSEMBLY LH
(a) Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg.
