Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connectors.

(b) Install the combination meter with the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Attach the 7 claws to install the finish panel.

(b) Attach the 4 claws.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

4. INSTALL NO. 2 SWITCH HOLE BASE Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.