Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL HEADLIGHT ASSEMBLY LH

(a) Connect the connectors and install the headlight.

(b) Attach the clamp.

(c) Install the 2 screws and bolt.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

2. INSTALL FRONT BUMPER BAR REINFORCEMENT LH Installation

3. INSTALL FRONT BUMPER COVER

(a) Install the front bumper cover Installation.

4. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

5. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

6. INSPECT HEADLIGHT AIMING Adjustments

7. ADJUST HEADLIGHT AIMING Adjustments

8. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

9. PREPARATION FOR FOG LIGHT AIMING Adjustments

10. INSPECT FOG LIGHT AIMING Adjustments

11. ADJUST FOG LIGHT AIMING Adjustments