Installation

LIGHTING (INT): IGNITION KEY CYLINDER LIGHT: INSTALLATION

1. INSTALL TRANSPONDER KEY AMPLIFIER

(a) Connect the connector.





(b) Turn the key amplifier as shown in the illustration to attach the 2 claws and install the key amplifier.

(c) Install the cover with the screw.

2. INSTALL UPPER STEERING COLUMN COVER Installation

3. INSTALL LOWER STEERING COLUMN COVER Installation

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

6. INSTALL NO. 2 SWITCH HOLE BASE Installation