Back Window Motor: Testing and Inspection

WINDOW / GLASS: BACK DOOR POWER WINDOW MOTOR: INSPECTION

1. INSPECT BACK DOOR POWER WINDOW REGULATOR MOTOR ASSEMBLY





(a) Check that the motor gear rotates smoothly as follows.

NOTICE:
Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

OK:





* If the result is not as specified, replace the front power window regulator motor assembly.

CAUTION:
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

Text in Illustration