Rear Door Window Regulator: Testing and Inspection

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): INSPECTION

1. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH





(a) Check that the motor gear rotates smoothly as follows.

NOTICE:
Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

OK:





* If the result is not as specified, replace the rear power window regulator motor assembly.

CAUTION:
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

Text in Illustration





2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH





(a) Check that the motor gear rotates smoothly as follows.

NOTICE:
Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

OK:





* If the result is not as specified, replace the rear regulator motor assembly.

CAUTION:
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

Text in Illustration