Reassembly

EXTERIOR PANELS / TRIM: AUTOMATIC RUNNING BOARD: REASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FLOOR SIDE SILL STAY

(a) Install the floor side sill stay with the 6 bolts.





2. INSTALL SIDE AUTO STEP MOTOR ASSEMBLY

(a) Install the bolt.

Torque : 24 Nm (245 kgf-cm, 18 ft-lbf)





(b) Using a 6 mm hexagon wrench, remove the 3 hexagon bolts and side auto step motor assembly.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

(c) Engage the 4 clamps.