Installation

MIRROR (EXT): OUTER REAR VIEW MIRROR: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

(a) Attach the claw to install the outer rear view mirror, and then install the 3 nuts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL FRONT DOOR GLASS WEATHERSTRIP INNER LH Reassembly

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH Disassembly

5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH Reassembly