Removal

1GR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL

1. REMOVE ENGINE WIRE

2. DISCONNECT HEATER WATER HOSE ASSEMBLY





(a) Disconnect the 2 hoses and remove the heater water hose assembly.

3. REMOVE IGNITION COIL ASSEMBLY





(a) Remove the 6 bolts and 6 ignition coils.

4. REMOVE REAR CYLINDER HEAD COVER Removal

5. REMOVE FUEL PIPE SUB-ASSEMBLY





(a) Disconnect the 2 fuel pipes Service Precautions.

(b) Remove the 2 bolts and fuel pipe.

6. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY Removal

7. REMOVE FUEL INJECTOR ASSEMBLY Removal

8. REMOVE INTAKE MANIFOLD Removal

9. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY Removal

10. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY Removal

11. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY Removal

12. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY Removal

13. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal

14. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

(a) Remove the 3 bolts and front No. 1 engine mounting bracket LH.





15. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

(a) Remove the 4 bolts and front No. 1 engine mounting bracket RH.