Installation

1GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL SPARK PLUG

(a) Install the 6 spark plugs.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 6 ignition coils with the 6 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 6 ignition coil connectors.

3. INSTALL AIR CLEANER CAP AND HOSE





(a) Install the air cleaner cap and hose.

Text in Illustration





(1) Install the air cleaner cap and hose with the bolt and fasten the 4 hook clamps.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(2) Tighten the clamp.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(3) Attach the 4 clamps and connect the ventilation hose, vacuum hose and mass air flow meter connector.

HINT
The direction of the hose clamp is indicated in the illustration.

4. INSTALL V-BANK COVER Installation