Installation

HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

(a) Attach the 2 claws to install the air conditioning amplifier assembly.

2. INSTALL ECU INTEGRATION BOX RH

(a) Install the ECU integration box RH with the 2 nuts and bolt.

(b) Attach the clamp and connect the connectors.

NOTICE:
* Do not twist the connectors of ECU when connecting them.
* Do not apply more force than necessary to the connectors. If more than 98 N (10 kgf, 22 lbf) of force is applied to a connector, the connector or connector holder may be damaged.

3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY Installation

4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

7. INSTALL LOWER INSTRUMENT COVER LH Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

(a) Attach the 5 clips to install the No. 2 instrument cluster finish panel garnish.

10. INSTALL COWL SIDE TRIM BOARD RH

(a) Attach the clip and claw to install the cowl side trim board.

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

(a) Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.

(b) Install the clip.

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.