Pinout Values and Diagnostic Parameters

SEAT BELT: SEAT BELT WARNING SYSTEM: TERMINALS OF ECU

1. CHECK COMBINATION METER





(a) Disconnect the F14 meter connector.

(b) Measure the resistance and voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the F14 meter connector.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the meter may have a malfunction.

2. CHECK CENTER AIRBAG SENSOR









3. CHECK OCCUPANT CLASSIFICATION ECU









If the result is not as specified, the occupant classification ECU may have a malfunction.