Installation

MIRROR: OUTER REAR VIEW MIRROR: INSTALLATION

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER

(a) Engage the claw, and temporarily install the outer rear view mirror assembly with cover.





(b) Tighten the 3 nuts in the order shown in the illustration to install the outer rear view mirror assembly with cover.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Engage the clamp and connect the connector.





(d) Install the clip.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

3. INSTALL COURTESY LIGHT ASSEMBLY Reassembly

4. INSTALL ASSIST GRIP COVER Reassembly

5. INSTALL FRONT ARMREST UPPER BASE PANEL Reassembly

6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly

7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH Reassembly