Removal and Replacement

1AR-FE ENGINE MECHANICAL: CYLINDER BLOCK: REPLACEMENT

1. REPLACE RING PIN

NOTICE:
It is not necessary to remove the ring pin unless it is being replaced.

(a) Remove the 12 ring pins.

(b) Using a plastic-faced hammer, install 12 new ring pins.





Standard Protrusion Height:





2. REPLACE STRAIGHT PIN

NOTICE:
It is not necessary to remove the straight pin unless it is being replaced.

(a) Remove the 14 straight pins.

(b) Using a plastic-faced hammer, install 14 new straight pins.





Standard Protrusion Height: