How To Proceed With Troubleshooting

AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use these procedures to troubleshoot the air conditioning system.
* *: Use Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

NEXT -- Continue to next step.

3. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

4. CHECK CAN COMMUNICATION SYSTEM*

(a) Use Techstream to check if the CAN communication system is functioning.

Result:





B -- GO TO CAN COMMUNICATION SYSTEM
A -- Continue to next step.

5. CHECK FOR DTC*

(a) Check for DTCs.

(1) Write down the DTCs or sensor check codes.

(b) Clear the DTCs or sensor check codes.

(c) Check whether the DTCs or sensor check codes recur.

(1) Reproduce the problem symptoms in accordance with the DTCs or sensor check codes that were written down, and check whether the DTCs or sensor check codes recur.

HINT
Refer to the DTC chart when any DTCs or sensor check codes are output.

Result:





B -- Go to step 8
A -- Continue to next step.

6. REFER TO PROBLEM SYMPTOMS TABLE

Result:





B -- Go to step 8
A -- Continue to next step.

7. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) DATA LIST / ACTIVE TEST Air Conditioning System (for Manual Air Conditioning System)

(b) Terminals of ECU Air Conditioning System (for Manual Air Conditioning System)

NEXT -- Continue to next step.

8. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

9. CONFIRMATION TEST

NEXT -- END