Removal

1AR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE NO. 1 ENGINE UNDER COVER

3. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

(a) Remove the clip.





(b) Using a 4 mm hexagon wrench, remove the screw.

(c) Peel off the front fender side protector, disengage the 3 clips, and then remove the front fender moulding sub-assembly RH.





(d) Remove the pad from the front fender moulding sub-assembly RH.

(e) Remove the 2 No. 4 clips from the front fender moulding sub-assembly RH.

(f) Remove the front fender side protector from the front fender moulding sub-assembly RH.





4. REMOVE FRONT FENDER LINER RH Removal

5. REMOVE FRONT FENDER APRON SEAL RH Removal

6. REMOVE V-RIBBED BELT

(a) Attach a wrench to the hexagonal portion of the belt tensioner as shown in the illustration, rotate the belt tensioner clockwise, and remove the V-ribbed belt.