Reassembly

1AR-FE FUEL: FUEL PUMP: REASSEMBLY

1. INSTALL NO. 1 FUEL SUCTION SUPPORT

(a) Install the No. 1 fuel suction support to the fuel filter.





2. INSTALL FUEL PUMP

(a) Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.





(b) Engage the 5 claws to install the fuel pump.





NOTICE:
* Make sure that the O-ring is not cut or pinched during the installation.
* Engage the claws securely.

3. CONNECT FUEL PUMP HARNESS

(a) Connect the fuel pump harness connector.





NOTICE:
Do not separate the tube indicated in the illustration Service Precautions.

4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

(a) Install the fuel pump filter tube while aligning it to the installation position of the No. 1 fuel sub-tank.





(b) Connect the jet pump nozzle.

(c) Make sure that the fuel tube passes under the protrusion of the fuel filter, and engage the claw of the No. 1 fuel suction support.





(d) Install the spring to the fuel suction plate shaft and install it to the No. 1 fuel sub-tank.

(e) Install a new E-ring.





5. INSTALL FUEL SENDER GAUGE ASSEMBLY Installation