Removal

U760E AUTOMATIC TRANSAXLE: TCM: REMOVAL

NOTICE:
When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

7. SEPARATE EJECTOR TUBE Removal

8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

9. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

10. REMOVE BATTERY Removal

11. REMOVE NO. 2 INLET AIR CLEANER Removal

12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

13. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Removal

14. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

15. REMOVE AIR CLEANER BRACKET Removal

16. REMOVE NO. 1 INLET AIR CLEANER Removal

17. REMOVE TCM

(a) Turn the lock lever and disconnect the connector from the TCM.





(b) Remove the 2 bolts and TCM from the transaxle.