Installation
BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION
1. INSTALL YAW RATE AND ACCELERATION SENSOR
(a) Install the yaw rate and acceleration sensor with the 2 bolts.
Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)
NOTICE:
* Be sure to insert the yaw rate and acceleration sensor claw into the stopper hole while installing the yaw rate and acceleration sensor.
* Do not damage the yaw rate and acceleration sensor.
* Make sure that the yaw rate and acceleration sensor is installed securely.
(b) Connect the connector to the yaw rate and acceleration sensor.
NOTICE:
Make sure that the yaw rate and acceleration sensor connector is connected securely.
2. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation
3. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation
4. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) Installation
5. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) Installation
6. INSTALL LOWER REAR CONSOLE BOX Installation
7. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) Installation
8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
9. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
11. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
12. INSTALL FRONT DOOR SCUFF PLATE RH Installation
13. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Installation
14. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Installation
15. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
16. INSTALL FRONT DOOR SCUFF PLATE LH Installation
17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) Installation
18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization
20. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION
Programming and Relearning