Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the tire pressure warning reset switch Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE LH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Removal

6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE TIRE PRESSURE WARNING RESET SWITCH

(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the driver side knee airbag.