Installation

ENGINE HOOD / DOOR: POWER BACK DOOR DRIVE UNIT: INSTALLATION

1. INSTALL BACK DOOR MOTOR UNIT

(a) Install the back door motor unit with the 4 bolts and clip.





Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

(b) Connect the connector.

(c) Install the back door stay plate and connect the power back door rod.





Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

2. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly

3. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY Reassembly

4. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH Installation

7. INSTALL FRONT DECK SIDE TRIM COVER LH Installation

8. INSTALL NO. 2 DECK SIDE TRIM HOOK Installation

9. INSTALL ROPE HOOK ASSEMBLY Installation

10. INSTALL REAR DECK TRIM COVER (w/o Remote Folding Function) Installation

11. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH (w/ Remote Folding Function) Installation

12. INSTALL REAR POWER OUTLET SOCKET COVER Installation

13. INSTALL REAR POWER POINT SOCKET ASSEMBLY Installation

14. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

15. INSTALL SIDE TRIM COVER LH (w/o Rear Seat Entertainment System) Installation

16. INSTALL POWER OUTLET SOCKET BEZEL (w/ Rear Seat Entertainment System) Installation

17. INSTALL DECK SIDE TRIM LH Installation

18. INSTALL DECK SIDE TRIM COVER LH Installation

19. INSTALL REAR FLOOR FINISH PLATE Installation

20. INSTALL REAR NO. 2 SEAT ASSEMBLY

Installation

21. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

22. INSTALL REAR DOOR SCUFF PLATE LH Installation