Part 2

INTERIOR: ROOF HEADLINING: INSTALLATION - (Continued)

41. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

42. INSTALL QUARTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

43. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

(a) Engage the 4 clips and the 7 claws.

(b) Install the 2 clips.

(c) Install the deck trim side panel assembly RH with the 3 bolts.





44. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

45. INSTALL FRONT DECK SIDE TRIM COVER RH

HINT
Use the same procedure for the RH side and the LH side.

46. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

HINT
Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

47. INSTALL ROPE HOOK ASSEMBLY (for RH Side)

HINT
Use the same procedure for the RH side and the LH side.

48. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

(a) Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.





49. INSTALL REAR ROOM TEMPERATURE SENSOR (w/ Rear Automatic Air Conditioning System) Installation

50. INSTALL SIDE TRIM COVER RH (w/o Rear Automatic Air Conditioning System)

(a) Engage the 4 claws to install the side trim cover RH.





51. INSTALL DECK SIDE TRIM RH

HINT
Use the same procedure for the RH side and the LH side.

52. INSTALL DECK SIDE TRIM COVER RH

HINT
Use the same procedure for the RH side and the LH side.

53. INSTALL REAR SEAT SIDE GARNISH CAP (w/o Rear Air Conditioning System)

(a) Engage the guide and the 8 claws, to install the rear seat side garnish cap.





54. INSTALL REAR SEAT SIDE GARNISH CAP (w/ Rear Air Conditioning System)

(a) Engage the guide and the 6 claws.





(b) Install the rear seat side garnish cap with the screw.

55. INSTALL REAR FLOOR FINISH PLATE

(a) Engage the 4 clips and the 4 claws, and install the rear floor finish plate.





56. INSTALL REAR NO. 2 SEAT ASSEMBLY Installation

57. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY Installation

58. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH Installation

59. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH Installation

60. INSTALL NO. 1 DECK BOARD

(a) Engage the 3 clips and install the No. 1 deck board to the deck floor box.





61. INSTALL NO. 2 DECK BOARD

(a) Engage the 3 clips and install the No. 1 deck board to the deck floor box.





62. INSTALL REAR MAT

(a) Install the rear mat.





63. INSTALL DECK FLOOR BOARD ASSEMBLY

(a) Install the 2 nuts and the deck floor board assembly.





(b) Engage the 3 claws.

64. INSTALL DECK SIDE TRIM BOX LH

(a) Install the deck side trim box LH as shown in the illustration.





(b) Install the 2 deck side trim clips and clip.





65. INSTALL REAR SEAT SIDE COVER LH

(a) Engage the 2 clips and install the rear seat side cover LH.





66. INSTALL DECK SIDE TRIM BOX RH

(a) Install the deck side trim box RH as shown in the illustration.





(b) Install the 2 deck side trim clips and clip.





67. INSTALL JACK CARRIER ASSEMBLY

(a) Engage the 3 claws, and install the jack carrier assembly.





68. INSTALL JACK ASSEMBLY

(a) Install the jack assembly.





69. INSTALL JACK CARRIER CUSHION

(a) Install the jack carrier cushion.





70. INSTALL JACK CARRIER SUPPORT

71. INSTALL REAR SEAT SIDE COVER RH

(a) Engage the 2 clips and install the rear seat side cover RH.





72. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

(a) Install the tonneau cover assembly.

73. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

(a) Engage the 2 guides and install the No. 2 deck board sub-assembly.





74. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

(a) Engage the 2 guides and install the No. 3 deck board sub-assembly.





75. INSTALL DECK BOARD ASSEMBLY

(a) Install the deck board sub-assembly.





76. INSTALL CENTER PILLAR GARNISH LH

(a) Engage the 2 guides and the clip.





(b) Install the center pillar garnish LH with the clip and screw.

77. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH Installation

78. INSTALL LOWER CENTER PILLAR GARNISH LH

(a) Engage the 2 claws and the 2 clips, and install the lower center pillar garnish LH.





79. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

(a) Align the alignment mark (red) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.





NOTICE:
After installation, check that the corners fit correctly.

80. INSTALL REAR DOOR SCUFF PLATE LH

(a) Engage the guide, 3 clips and 5 claws, and install the rear door scuff plate LH.