Part 3

INTERIOR: ROOF HEADLINING: INSTALLATION - (Continued)

81. INSTALL FRONT PILLAR GARNISH LH

(a) Remove the protective cover.





(b) Make sure that the front pillar garnish clip is not damaged.





NOTICE:
* If there is any damage, replace the garnish clip with a new one.
* When a garnish clip is being replaced, make sure to install it in the direction shown in the illustration.

(c) Engage the 3 guides.

(d) Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish LH.

HINT
Tape the tips of the needle-nosed pliers before use.

(e) Engage the 2 clips to install the front pillar garnish LH.





82. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

(a) Align the alignment mark (blue) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.





NOTICE:
After installation, check that the corners fit correctly.

83. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

(a) Engage the claw and clip, install the cowl side trim sub-assembly LH.





(b) Install the clip.

84. INSTALL FRONT DOOR SCUFF PLATE LH

(a) Engage the guide and the 8 claws, and install the front door scuff plate LH.





85. INSTALL CENTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

86. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

87. INSTALL LOWER CENTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

88. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

(a) Align the alignment mark (green) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.





NOTICE:
After installation, check that the corners fit correctly.

89. INSTALL REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side.

90. INSTALL FRONT PILLAR GARNISH RH

(a) Remove the protective cover.





(b) Make sure that the front pillar garnish clip is not damaged.





NOTICE:
* If there is any damage, replace the garnish clip with a new one.
* When a garnish clip is being replaced, make sure to install it in the direction shown in the illustration.

(c) Engage the 3 guides.

(d) Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish RH.

HINT
Tape the tips of the needle-nosed pliers before use.

(e) Engage the 2 clips to install the front pillar garnish RH.





91. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Align the alignment mark (pink) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip RH.





NOTICE:
After installation, check that the corners fit correctly.

92. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

93. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side.

94. INSTALL REAR NO. 1 SEAT ASSEMBLY LH Installation

95. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY LH (w/ Remote Folding Function) Installation

96. INSPECT REAR SEAT SLIDE ADJUSTER LOCK (for LH Side) Installation

97. INSTALL REAR SEAT LEG SIDE COVER LH Installation

98. INSTALL REAR INNER TRACK BRACKET COVER LH Installation

99. INSTALL REAR OUTER TRACK BRACKET COVER LH Installation

100. INSTALL REAR SEAT TRACK BRACKET COVER LH Installation

101. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side) Installation

102. INSTALL REAR CENTER SEAT ASSEMBLY

103. INSTALL REAR NO. 1 SEAT ASSEMBLY RH Installation

104. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY RH (w/ Remote Folding Function)

HINT
Use the same procedure for the RH side and the LH side.

105. INSPECT REAR SEAT SLIDE ADJUSTER LOCK (for RH Side) Installation

106. INSTALL REAR SEAT LEG SIDE COVER RH Installation

107. INSTALL REAR INNER TRACK BRACKET COVER RH Installation

108. INSTALL REAR OUTER TRACK BRACKET COVER RH Installation

109. INSTALL REAR SEAT TRACK BRACKET COVER RH Installation

110. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side) Installation