Installation

SEAT: REAR NO. 2 SEAT ASSEMBLY: INSTALLATION

1. INSTALL REAR NO. 2 SEAT ASSEMBLY

(a) Install the 6 bolts on the rear of the seat.





Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(b) Install the rear No. 2 seat assembly with the bolt.





Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

2. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY

(a) Engage the 2 claws [B].





(b) Engage the 2 claws [A] to install the center seat cushion cover sub-assembly.

3. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH Installation

4. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH Installation

5. INSTALL DECK FLOOR BOARD ASSEMBLY Installation

6. INSTALL REAR MAT Installation

7. INSTALL DECK SIDE TRIM BOX RH Installation

8. INSTALL JACK CARRIER ASSEMBLY Installation

9. INSTALL JACK ASSEMBLY Installation

10. INSTALL JACK CARRIER CUSHION Installation

11. INSTALL JACK CARRIER SUPPORT

12. INSTALL REAR SEAT SIDE COVER RH Installation

13. INSTALL DECK SIDE TRIM BOX LH Installation

14. INSTALL REAR SEAT SIDE COVER LH Installation

15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation

17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY Installation

18. INSTALL DECK BOARD ASSEMBLY Installation