Removal

2GR-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL

1. REMOVE FRONT WHEEL RH (for 4WD)

2. REMOVE ENGINE UNDER COVER ASSEMBLY (for 2WD) Removal

3. DISCONNECT FRONT FENDER LINER RH (for 4WD)

4. REMOVE FRONT FENDER APRON SEAL RH (for 4WD) Removal

5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Disconnect the wiring harness protector. (w/ oil cooler)





(b) Disconnect the oil pressure switch assembly connector.

(c) Using a 24 mm deep socket wrench, remove the oil pressure switch. (w/o oil cooler)





(d) Using a 24 mm deep socket wrench, remove the oil pressure switch. (w/ oil cooler)