Headlamp: Service and Repair

REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY

HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- If the installation area of the headlight assembly is damaged, use a supply retainer for low-cost repair.
- Make sure that the headlight assembly is not damaged.

1. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH







a. Cut off the part shaded in the illustration and sand smooth with sandpaper.

NOTICE: After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.







b. Install the lower headlight protector retainer LH with the 2 screws.