Maintenance Indicator Reset

Oil Change Reset Procedure

1. Turn the engine switch off with the trip meter A reading shown.

2. While pressing the trip meter reset button, turn the engine switch on.

Without multi-information display

3. Continue to press and hold the button until the trip meter displays 000000.

With multi-information display

3. Continue to press and hold the button until "MAINT REQD RESET MODE COMPLETE" appears in the display.


With Navigation System (if equipped)





1. Push the "SETUP" button.





2. Touch "Vehicle".





3. Touch "Maintenance".





4. Touch the desired button.

"Delete All": To cancel all conditions which have been inputted.
"Reset All": To reset the item which has satisfied a condition.
"Set Dealer": To register dealer information.
"Dealer Info.": To edit dealer information.
"Reminder": When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen.

When the vehicle needs to be serviced, the touch screen button color will change to orange.

INFORMATION ITEMS
"Engine oil": Replace engine oil
"Oil filter": Replace engine oil filter
"Rotation": Rotate tires
"Tires": Replace tires
"Battery": Replace battery
"Brake pad": Replace brake linings
"Wipers": Replace wiper blades
"Coolant": Replace engine coolant
"Brake oil": Replace brake fluid
"Trans. fluid": Replace transmission fluid
"Service": Scheduled maintenance
"Air filter": Replace air filter
"Personal": New information items can be created separately from provided ones





5. Input the conditions.
"Date": The next maintenance date can be input.
"Distance": The driving distance until the next maintenance check can be input.
"Delete": To cancel the date and distance conditions.
"Reset": To reset the date and distance conditions.
6. Touch "OK".
The screen then returns to the "Maintenance" screen.